Description |
Weight (Kg) |
(£ Ea) 1+ |
(£ Ea) 10+ |
(£ Ea) 50+ |
(£ Ea) 100+ |
Hardware |
Hook clamps tighten against tube to hang lights but can only be used hanging down. Half couplers can be tightened at any angle without damaging the tube. Safety bonds are now used in preference to chains because it is easier to detect when they are weakened (the steel wire strands can be seen when they break whereas chain links can develop invisible fractures). Wire safety bonds should still be disposed of if they have been subjected to a shock load such as catching a falling light. |
Hook clamp (standard) fits 48 to 51mm tubes |
0.31 |
3.85 |
3.75 |
3.25 |
2.95 |
Safety bond, single ended, 10KG, black steel wire rope with snap hook and eye |
0.10 |
3.65 |
3.55 |
3.45 |
3.25 |
Manfrotto C4560 Half Coupler (slimline) fits 48 to 51mm tubes without digging in |
0.34 |
15.60 |
15.60 |
15.60 |
15.60 |
Scaffold end bung Black internal bungs, also used as feet |
0.02 |
1.00 |
1.00 |
1.00 |
1.00 |
Aluminium scaffold tube, 20ft x 2 inch approx 6.1m x 48mm. We can supply cut lengths too |
9.40 |
60.30 |
49.56 |
49.56 |
49.56 |
Aluminium scaffold tube, per 300mm (or part of) A cutting charge is added for each cut |
0.47 |
3.02 |
3.02 |
3.02 |
3.02 |
Cutting charge for aluminium scaffold one added for each cut required from a 20ft tube |
|
3.75 |
3.75 |
3.75 |
3.75 |